3E Analysis of a Solar Assisted Rotary Type Coal Dryer

Mustafa Zeki Yilmazoglu, Ehsan Amirabedin

Abstract


In this study, a solar assisted rotary coal dryer is analyzed in terms of exergy economy and environment (3E). In the analysis two different heat sources are utilized. In the first one, a natural gas burner is used for producing the required heat for coal drying. In the second one, a parabolic solar system is employed as a heat source for drying same amount of wet coal. First of all, design parameters of a rotary coal dryer are investigated and economic operation range, the effects of some parameters are determined for the given type of coal. The effects of the dry bulb temperature at the inlet of the dryer are investigated. The second law efficiency of the dryer is calculated. For the parabolic solar system an economic analysis is carried out to estimate the payback period of the investment, which is found to be 6.6 years without heat storage. Also, by applying solar system to the coal dryer, reduced CO2 emissions are found.   
111

Keywords


Rotary dryer; exergy analysis; 3E analysis; coal dryer; parabolic solar

Full Text:

PDF

References


S. A. Mujumdar, Industrial Handbook of Drying, Third Edition, CRC/Taylor&Francis, 2007.

Arruda E.B., Façanha J.M.F., Pires L.N., Assis A.J., Barrozo M.A.S., Conventional and modified rotary dryer: Comparison of performance in fertilizer drying, Chemical Engineering Processing : Process Intensification, 48, 1414-1418, 2009.

Van Puyvelde D.R., Modeling the hold up of lifters in rotary dryers, Chemical Engineering Research and Design, 87, 226-232, 2009.

Revol D., Briens C.L., Chabagno J.M., The design of flights in rotary dryers, Powder Technology, 121, 230-238, 2001.

Lee A., Sheehan M. F., Development of a geometric flight unloading model for flighted rotary dryers, Powder Technology, 198, 395-403, 2010.

Kemp I. C., Comparıson of particle motion correlations for cascadıng rotary dryers, Drying 2004 – Proceedings of the 14th International Drying Symposium (IDS 2004) São Paulo, Brazil, 22-25 August 2004, vol. B, pp. 790-797.

Morgono M.T.H., Alyway A., Kuswandi S., Effects of feed rate and residence time on environment of rotary dryer processes, Journal of Applied Sciences in Environmental Sanitation, 4, 11-20, 2009.

Fagernas L., Brammer J., Wilen C., Laurer M. Verhoeff F., Drying of biomass for second generation synfuel production, Biomass and Bioenergy, 34, 1267-1277, 2010.

Pinacho A., García-Encina P.A., Sancho P., Ramos P., Márquez M.C., Study of drying systems for the utilization of biodegradable municipal solid wastes as animal feed, Waste Management, 26, 495-503, 2006.

Kakaras E., Ahladas P., Syrmopoulos S., Computer simulation studies for the integration of an external dryer into a Greek-lignite fired power plant, Fuel, 81, 583-593, 2002.

Krokida M.K., Maroulis Z.B., Kremales C., Drying Technology., 20, 4-5, 771-778, 2002.

Z. Oktay, Investigation of coal-fired power plants in Turkey and a case study: Can plant. Applied Thermal Engineering 29, 550–557, 2009.




DOI (PDF): https://doi.org/10.20508/ijrer.v2i1.105.g81

Refbacks

  • There are currently no refbacks.


Online ISSN: 1309-0127

Publisher: Gazi University

IJRER is indexed in EI Compendex, SCOPUS, EBSCO, WEB of SCIENCE (Clarivate Analytics)and CrossRef.

IJRER has been indexed in Emerging Sources Citation Index from 2016 in web of science.

WEB of SCIENCE in 2025; 

h=35,

Average citation per item=6.59

Last three Years Impact Factor=(1947+1753+1586)/(146+201+78)=5286/425=12.43

Category Quartile:Q4